TEFAL FASTEO SV6040 Steam Generator Iron

FASTEO SV6040 Steam Generator Iron Live fast, iron fast

Fasteo produces superb results in no time and offers the perfect balance of comfort and efficiency. The higher
steam output promises to remove even the most stubborn creases fast. Featuring a larger water tank than a
steam iron, Tefal steam generators allow users to iron for longer without having to stop to refill during a session.
Filter cartridges prevent limescale build-up, so users can power through their ironing time after time, with no loss
of steam performance.

Reference: SV6040G0

SUPERB PERFORMANCE IN NO TIME

Combining exceptional speed and convenience, the Fasteo steam generator iron is perfectly suited to the demands of a busy lifestyle. Powerful steam and a large water tank allow Fasteo to deliver faster performance than a standard steam iron. The anti-scale cartridge system provides stress-free and reliable maintenance for longer-lasting performance and the rapid, 2-minute heat-up time means Fasteo is ready-to-go in no time. A ceramic soleplate that delivers effortless glide, combined with outstanding steam performance, brings superb results on a wide variety of garments. Vertical steaming functions are also available for suits, delicate fabrics and even curtains. Featuring a safety lock, compact format, and cord storage solutions, Fasteo adds maximum convenience to the ironing experience.
Essentials
  • Fast & convenient ironing

    Fasteo promises to remove even the most stubborn creases fast. 

  • Powerful 

    Powerful steam to remove creases.

  • Steam Boost

    To iron thick fabrics and remove stubborn creases.

  • Lock system 

    For easy and safe transport

  • Easy glide

    Ceramic soleplate for enhanced gliding.

  • Vertical steaming

    Steaming that removes creases from delicate fabrics, suits and even curtains.

  • Easy cord storage

    Steam cord easily wraps around the base of the product.

  • Unlimited refills during ironing sessions

    Large 1,2 L water tank

  • Easy maintenance

    Effortless maintenance with filter cartridges included in pack to prevent limescale build-up, so users can power through their ironing time after time, with no loss of steam performance

     

    2 x filter cartridges included in pack

Accessories
Specifications
STEAM & POWER PERFORMANCE
Power 2200  
Steam output 100  g/min
Steam boost 180  g/min
Water pump 5,2  bar
Vertical Steam    
Setting of steam & temperature Manual setting  
Heat up time 2  min
SOLEPLATE PERFORMANCES
Soleplate Technology Ceramic  
Glideability of soleplate ***  
Durability of soleplate / scratch resistance ***  
Continuous steam diffusion Tip and side  
COMFORT IN USE
Comfort Handle    
Anti-drip No  
Eco Mode    
Power cord length 1.6  m
Lock-System    
Water tank capacity 1.2  L
Water tank Fix  
Continuous refilling    
Cord Storage Steam cord  
DURABILITY
Anti scale function Cartridge  
Scale alert    
OTHER FEATURES
Colours Blue  
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
The Durillium soleplate:
Regularly clean the soleplate with a damp, non metallic washing up pad. For easier, non-corrosive cleaning of your iron's soleplate, use a damp sponge on the soleplate while it is still warm.
If cleaning dirt off is an issue, use the stick which is made specifically for cleaning the Durillium soleplates.

The stainless soleplate:
Clean the soleplate of your iron when it is cool with a damp cloth or a non-abrasive sponge.

The autoclean soleplate:
It is recommended that you use a soft damp cloth on the warm soleplate, in order not to damage the surface.
Warning: The use of iron cleaner will cause damage to your soleplate's autoclean coating.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.