TEFAL EXPRESS COMPACT ANTI-SCALE SV7130

EXPRESS COMPACT ANTI-SCALE SV7130 Up to 3 x more steam* and the best** Scale Collector for express ironing
  • Faster ironing thanks to 6 pump bars and up to 130g/min steam
  • Up to 360g/min steam boost for tough creases and vertical steaming
  • Removable Scale Collector for easy maintenance and lasting power
  • Xpress Glide soleplate, 1.7L tank, Eco Mode, auto-off and carry lock

Reference: SV7130G0

Iron faster with perfect results

Looking for a quicker and easier way to iron? Upgrade your steam iron to the Tefal Express Compact Anti-Scale SV7130 steam generator iron. Its 6 bar pump produces up to 130g/min continuous steam – up to three times more than a steam iron* – plus an extra-powerful steam boost of up to 360g/min to cut through stubborn creases fast. You can also use this boost for vertical steaming curtains, upholstery and hanging garments, too. Our patented removable Scale Collector – the best collector for capturing scale in the iron** – makes descaling is quick and easy. Just pull out the collector and rinse it under the tap to keep your Tefal steam generator iron going strong; no filter cartridges, no fuss. You can also flush scale out of your iron manually to maintain its performance: simply fill the water tank and press the anti-scale button for 3 seconds. The new super-smooth Xpress Glide ceramic soleplate means ironing takes less effort and this steam generator is so simple to set up: just press to set the temperature to suit the fabric you’re ironing and, when the thermostat light goes out, you’re good to go! Express Compact Anti-Scale also has a 1.7L removable water tank for up to 2 hours of continuous use and easy refills under the tap, Eco Mode to cut energy use by up to 20%*** without compromising performance, and automatic shut-off after 8 minutes for peace of mind. Plus, the easy-carry lock, cord compartment and compact size make it a breeze to store.

  • Time saving: Powered by a 6 bar pump, Express Compact Anti-Scale produces up to three times more continuous steam* to cut your ironing time and achieve perfect results.
  • Steam on demand: The super-powerful boost gives you a shot of up to 360g of steam a minute when you need it. It’s great for tackling stubborn creases and thick fabrics, as well as vertical steaming.
  • Hassle-free maintenance: The best Scale Collector to capture scale in the iron**, plus a manual flush system, make descaling quick and easy to ensure lasting steam power and easy crease removal.
  • Easier ironing: Our Xpress Glide ceramic soleplate slides effortlessly over any fabric, so you can glide through ironing with ease, while manual controls make this Tefal steam generator iron simple to use.
  • Convenient features: It’s got a 1.7L removable tank for up to 2 hours' use and easy refills, an energy-saving Eco Mode***, auto-off feature for peace of mind, carry lock for portability and cord storage.

*vs a traditional steam iron

*Compared to a traditional steam iron **Versus Top 50 bestselling steam generators, Europe – March 2018 ***-20% compared with energy use at maximum output level

Essentials
  • Express ironing

    A 6 bar pump pressure for faster ironing

  • Stress-free storage

    Auto-off, carry lock, cord compartment and compact design for safe and easy storage

  • HIGHLY COMPACT FRAME

    Designed for maximum convenience and ease, the compact frame has a smaller footprint than a sheet of A4 paper.

  • Time saving

    New Xpress Glide ceramic soleplate for fast and effortless ironing

  • Non-stop sessions

    1.7L water tank for up to 2 hours’ ironing; removable for easy tap refills

  • Energy saving

    Energy-saving Eco Mode to cut energy use by up to 20%***

  • SUPERB RESULTS IN NO TIME

  • Steam on demand

    Up to 360g/min steam boost to smooth stubborn creases and for vertical steaming

  • FAST 2-MINUTE HEAT-UP TIME

    With a fast 2-minute heat-up, get your steaming sessions up and running in no time.

  • No-Setting system for total safety

    Effortless, worry-free ironing on any fabric with No-Setting technology: one perfect combination of steam and temperature, for 100% safe ironing results with no risk of burning.

  • Repairable for 10 years

    Designed for easy repair at the lowest cost for 10 years; fast delivery of parts to 6500 repair centres worldwide

Accessories
Specifications
STEAM & POWER PERFORMANCE
Steam output 130  g/min
Steam boost 360  g/min
Water pump 6  bar
Vertical Steam    
Setting of steam & temperature No setting needed  
Heat up time 2  min
Steam hose length 1.70  m
SOLEPLATE PERFORMANCES
Soleplate Technology Ceramic Xpress Glide  
COMFORT IN USE
Comfort Handle    
Auto-Off    
Eco Mode    
Power cord length 1.6  m
Lock-System    
Water tank capacity 1.7  L
Water tank Removable  
Continuous refilling    
Cord Storage Power cord and water cord  
DURABILITY
Scale collector    
Anti scale function Anti-scale setting  
Scale alert    
OTHER FEATURES
Colours Port Royal and Black  
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
This function allows you to iron fabrics in situ or on a hanger.
To do this, set the iron temperature button to the maximum position.
• Leave the item on a hanger and gently pull the fabric with one hand.
• Press the steam control button intermittently and move the iron from top to bottom.
As the steam produced is very hot, it softens the fibres and removes creases.
Note: Never use the vertical steam function on an item being worn by anyone.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.