TEFAL TEFAL EXPRESS POWER SV8062

TEFAL EXPRESS POWER SV8062 Powerful steam generator iron with patented Scale Collector and one temperature setting for fast and easy results
  • Iron faster with 6.8 bars, a 460g/min boost and our smoothest glide
  • Go from denim to delicates using one setting safe for all ironable fabrics
  • Maintain lasting steam power for easy ironing with the Scale Collector
  • Enjoy peaceful sessions thanks to advanced silent pump technology

Reference: SV8062G0

Iron faster, easier and quieter

Speed through your ironing with the Express Power steam generator iron by Tefal. This ultra-powerful iron comes equipped with our patented removable Scale Collector: the ultimate weapon against limescale. By collecting up to 10 times more scale*, this ensures your Tefal steam generator iron can keep pumping out powerful steam and removing creases with ease. All you need to do is pull out the collector and rinse it under the tap – scale be gone! The 6.8 bar pump produces up to 130g of continuous steam a minute for high-efficiency ironing. There’s also a 460g/min boost for tackling tough creases or even vertically steaming – it’s great for last-minute outfit touch-ups and makes sanitising curtains a doddle. With 33% more glide**, the Durilium Airglide Autoclean soleplate moves effortlessly over fabrics. More active steam holes provide better steam distribution for faster crease removal, while the Autoclean catalytic coating keeps it clean over time (so you don’t have to). You won’t even need to set it: Express Power has just one setting that delivers the ideal combination of steam and temperature to suit all ironable fabrics. Go from denim to delicates with no burn risk, no settings and no need to sort your laundry pile. You can even catch up on your favourite TV shows while getting the job done thanks to the silent pump technology. And, if you’ve let your laundry pile stack up over the week, fret not: the 1.8L water tank gives you up to 2 hours’ ironing time from one fill. Plus, because it’s removable, it’s easy to top up under the tap. A carry lock secures the iron to its base to stop it slipping when moving it to and from storage.
Essentials
  • Lasting performance

    Removable Scale Collector to ensure lasting steam power for easy crease removal

  • Quick results

    Up to 6.8 bars, 130g/min continuous steam and a 460g/min boost for high-efficiency ironing

  • Effortless glide

    +33% glide** glide, optimal steam diffusion and no maintenance for fast and effortless ironing

  • No setting

    One setting that’s safe for all ironable fabrics for an easier and faster ironing experience

  • Vertical steaming

    The easy vertical steaming feature has a lightning-quick heat-up time of only 30 seconds, for last-minute touch-ups to help you look your best whenever you need it.

  • Peaceful sessions

    Advanced silent pump technology to minimise pump noise

  • Safe and secure

    Carry lock for safe and easy transportation and storage

  • Sanitize your garments

    The combination of heat from the soleplate and steam helps kill up to 99.9% of germs bacteria for maximum hygiene.

  • Repairable for 10 years

    Designed for easy repair at the lowest cost for 10 years; fast delivery of parts to 6500 repair centres worldwide

Accessories
Specifications
STEAM & POWER PERFORMANCE
Power 2800  W
Steam output 130  g/min
Steam boost 450  g/min
Water pump 6.8  bar
Vertical Steam    
Heat up time 2  min
Steam output Professional (>120 g/min)  
Your habits Long session of ironing  
Water tank capacity Large (> 1L)  
Steam hose length 1.60  m
SOLEPLATE PERFORMANCES
Soleplate Technology Durilium Airglide Autoclean  
Glideability of soleplate *****  
Durability of soleplate / scratch resistance *****  
Continuous steam diffusion Tip, side and heart  
COMFORT IN USE
Comfort Handle    
Silence technology    
Anti-drip    
Auto-Off    
Eco Mode    
Power cord length 1.7  m
Lock-System    
Water tank capacity 1.8  L
Water tank Removable  
Empty tank detector    
Continuous refilling    
Cord Storage Power cord and steam cord  
DURABILITY
Scale collector    
Anti scale function Removable anti-scale collector  
Scale alert    
OTHER FEATURES
Colours Black and silver premium  
Frequent questions
Choose a board that is height-adjustable to adjust it to your height. It should be steady and robust so that you can place the ironing appliance on it.
The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. The ironing board cover should also be suitable to allow the flow of steam through.
To avoid damaging the soleplate, follow this advice:
• Always place your iron on its heel rest or its base (depending on model).
• Avoid ironing over abrasive items (buttons, zip fastenings, etc.).
• Never clean your iron's soleplate with abrasive or metallic pads.
Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.
If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre.
Important: The iron takes longer to cool down than to heat up. We recommend that you start with fabrics to be ironed at a low temperature.
Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.
The steam is more or less significant depending on the temperature setting of the iron. We advise you to use steam occasionally when the temperature is set low on the iron, otherwise drops of water could appear on your laundry.
Before cleaning, ensure that the appliance is unplugged and that the soleplate and iron rest plate are cold.
Do not use any detergents or descaling products to clean the soleplate or base unit. Never hold the iron or its base unit under tap water.

• Cleaning the base unit:
Clean the plastic parts from time to time with a soft, slightly damp cloth.

• Cleaning the scale collector:
Wait until the appliance has been switched off for at least 1 hour.
Remove the scale collector by lifting and rotating the flap a quarter turn.
Rinse the scale collector under the tap and put it back on the iron.

• Self-cleaning of the soleplate (depending on model):
When the anti-calc indicator blinks, perform the steps described in this video.
It is normal. Your iron generates a lot of steam; this steam is condensing on the board. Some waterdrops could appeared underneath the ironing board and fall on the flooring.
• You are using chemical descaling products or additives in the water. You should never put these products in the water tank. If this is the case, contact an approved service centre.
• Your washing has not been rinsed sufficiently or you are ironing a new item of clothing before washing it. Ensure that you have rinsed your clothes thoroughly in order to to remove soap deposits or chemicals from new garments which could stick to the iron.
• Your iron is too hot, see our recommendations on temperature control settings in your product manual.
• You are using starch. Only spray starch on the reverse of the fabric to be ironed.
Some laundry starches and synthetic fibres may stick to the surface of the iron. Please clean the Iron's surface.
The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
No, it is normal to have noise and vibration when the steam is activated. The use of steam triggers the functioning of an electric pump.
If the temperature of your iron is adjustable (depending on the model), use steam occasionally when the temperature is set low on the iron.
The temperature is set too low on your iron, it does not allow you to have steam.
Yes, this is quite normal. The water flow allows the cleaning of the soleplate interior.
The self-cleaning operation of the soleplate has to be performed. Refer to the chapter "Maintenance and cleaning", "How to descale my steam generator?".
Yes, this is quite normal. The self-cleaning operation causes the electric pump to operate.
No. The two cables are separately insulated; they are protected and rigorously checked. However, if you notice that the cable is damaged, have it repaired by an approved repair centre.
This system prevents the soleplate from clogging. Its active coating eliminates fibres and impurities that often become stuck to the plate and end up reducing its glide.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.